An independent reference about aquarium equipment. It does not sell equipment, gives no veterinary advice and is not connected with the former site on this domain.

aquarium technology: a reference guide to equipment

Akva-DV: a reference guide to aquarium technology

An aquarium is not just water, substrate and fish; it is also a small technical system. The filter pushes water through its media, a light on a timer sets the photoperiod, a heater holds the temperature, and sometimes a CO2 cylinder, an air pump and automation join in. Akva-DV explains how these parts work, how to check and maintain them, and what to do when something gets noisy, starts leaking or stops working. No brands or models, only principles you can rely on with any equipment.

Well-tuned aquarium equipment is almost invisible: it quietly does its job while you look at the water, not at the cables.

— From the editors

Where to start

Filters and flow

Mechanical filtration traps debris, while biological filtration turns dangerous waste into less harmful compounds. We look at how canister, internal, hang-on and air-driven sponge filters work and how to service them without upsetting the bacteria.

Light and CO2 (Russian only)

An LED fixture on a timer sets a steady photoperiod, while a pressurised system feeds carbon dioxide to the plants. We explain which parts it is made of and why the gas runs only while the lights are on.

Heating and cooling

In winter a thermostat heater warms the water; in summer a fan and fresh air cool it. We explain how to keep the temperature steady and why a heater must never be switched on until it is under water.

Water tests

Liquid drop tests and strips show pH, KH, GH, nitrite and nitrate. We suggest what to measure first, how to avoid mistakes during a test and why the results belong in a log.

Guide sections

  • Guides

    Step-by-step guides: servicing a canister filter, setting the photoperiod, starting CO2 injection, preparing for a water change. Plus the article catalogue.

  • Tools

    Liquid drop tests and strips, a thermometer, a timer and a scheduled socket, a gravel vacuum with a hose and a parameter log: what helps and how to use it.

  • Comparisons

    Canister or internal filter, drop tests or strips, pressurised CO2 or a tank without gas injection: the pros, the hassle and who each option suits.

  • Problems

    A noisy filter, weak flow, cloudy water, algae film, a tank overheating in summer, an odd test result: what to check and in what order.

  • Security

    Water near sockets, a heater out of water, water siphoning back into an air pump, CO2 pressure, overheating cables and leaks into the flat below.

  • Glossary

    The nitrogen cycle, biological media, pH, KH, GH, drop checker, regulator, check valve, airlift and drip loop, explained briefly and plainly.

  • Questions

    Answers about the guide, about choosing and setting up equipment, about safety and about routine maintenance of aquarium gear.

Your aquarium's technical map in five steps

  1. List all your equipment

    Write down everything that runs on the tank: filter, light, heater, air pump, cylinder and regulator, timers, sensors. Next to each item, note where its manual is kept and when you got it. When something breaks, this list will save you time.

  2. Note which socket powers what

    Label the plugs and sketch a simple diagram: which device goes into which socket and which of them run on a timer. Then before a water change you will switch off the heater and filter with confidence instead of guessing which cable does what.

  3. Start a parameter log

    In a notebook or spreadsheet, record water test results, the dates of water changes and filter cleaning, and any changes to the equipment. After a few weeks the log will start revealing patterns you would never catch from memory.

  4. Draw up a maintenance schedule

    Decide what you do every week, what once a month and what less often: water changes, rinsing sponges, cleaning the glass and the light, checking the hoses. A schedule taped inside the cabinet door beats trying to remember when you last opened the filter.

  5. Check cables and valves every season

    Inspect cables, plugs and sockets for cracks, traces of moisture, discolouration or a smell of overheating. Check the check valves and hose connections and, if you run CO2, test every joint with soapy water. Unplug and replace any device that looks suspicious.

The essentials in brief

Do you sell equipment?

No. Akva-DV is a reference guide, not a shop or a service. We do not sell equipment, take orders or send you to product pages. Our job is to explain how equipment works and how to use it calmly and safely.

Which filter is best?

We do not recommend brands or models, but we explain what to look at: whether the manufacturer's stated flow rate suits your tank volume, whether there is room for biological media, how easy the housing is to open, how noisy it is and whether spare parts are available.

Can I build my own CO2 system?

We do not describe or recommend homemade pressure vessels: such a container can burst or release gas without any control. If your plants need CO2, use a factory-made cylinder, regulator and other parts that are designed for the job and come with instructions.

Do you advise on fish health?

No. We give no veterinary advice and do not discuss treatments for animals. If your fish behave oddly, check the equipment and water parameters, and take questions about the animals themselves to a vet who works with fish.

About the project

Akva-DV is an independent reference about aquarium technology. We look at the aquarium as a technical system: filtration, lighting, CO2 injection, heating and cooling, water tests, automation, noise and electrical safety. This guide has no connection with earlier websites on this domain and does not reproduce their content.

We do not sell equipment, do not name brands, models or shops, do not compare products against each other and give no veterinary advice. Choosing fish and plants and setting up a first tank are covered in detail by beginners' guides, so those topics appear here only where the equipment cannot be understood without them.

  • Guides

    Step-by-step guides: servicing a canister filter, setting the photoperiod, starting CO2 injection, preparing for a water change. Plus the article catalogue.

  • Tools

    Liquid drop tests and strips, a thermometer, a timer and a scheduled socket, a gravel vacuum with a hose and a parameter log: what helps and how to use it.

  • Problems

    A noisy filter, weak flow, cloudy water, algae film, a tank overheating in summer, an odd test result: what to check and in what order.

  • Security

    Water near sockets, a heater out of water, water siphoning back into an air pump, CO2 pressure, overheating cables and leaks into the flat below.

  • Glossary

    The nitrogen cycle, biological media, pH, KH, GH, drop checker, regulator, check valve, airlift and drip loop, explained briefly and plainly.

Sources

  • Equipment manufacturers' instructions (in general terms)
  • General electrical safety rules (in general terms)
  • Editorial materials of the guide

Everything described here is stated in general terms and reflects the editors' understanding at the time of writing. The design of your particular filter, light or regulator may differ from our description. If the manual for your equipment says otherwise, follow it: it was written specifically for that device.