Questions
Frequently asked questions
Here are the questions that come up most often for people setting up an aquarium with equipment for the first time or wanting to bring order to it: what the guide can do, which equipment is really needed and how to handle it without putting yourself, the inhabitants or the neighbours at risk.
If you are not sure your tank needs a new device, check the log first: the answer is often already written there.
About the guide
Who writes the articles?
The guide's editorial team. We rely on the general principles set out in equipment manufacturers' instructions and on general electrical safety rules, and we do not discuss specific devices or their manufacturers.
Do you sell equipment or service aquariums?
No. Akva-DV is not a shop or a service: we do not sell equipment, take maintenance orders or make house calls. We explain how equipment works and how to handle it.
Why don't you name brands and models?
Models come and go quickly, and our aim is to teach you to judge equipment on substance: design, ease of maintenance and safety. These principles will serve you with any equipment.
Can I ask you about fish health?
We give no veterinary advice and do not discuss treatments for animals. Take such questions to a vet who works with fish. We can only help you check whether the equipment is working and the water parameters are in order.
Equipment
Which filter does my tank need?
Look at the flow rate the manufacturer states for your volume, room for biological media, ease of maintenance and noise. Air-driven sponge filters suit small tanks and fry tanks, while larger aquariums more often get canister filters.
Does my tank need CO2 injection?
Not necessarily. Many tanks get enough carbon dioxide from the fish and bacteria. Gas injection is for those who keep lots of plants under bright light and are ready to check the system regularly.
Is a lighting timer a must?
It is highly recommended. A timer switches the light on and off at the same time each day, keeping the photoperiod steady, which is easier on the plants and helps keep algae in check.
Why an air pump if I have a filter?
An air pump increases surface movement and oxygenation, especially in hot weather, and drives air-driven sponge filters. If it sits below the water level, fit a check valve on the airline.
Safety and maintenance
What should I do before a water change?
Unplug the heater, the filter and any other equipment that is in or above the water. Switch the heater back on only once the water level is restored and it is fully submerged.
How often should I clean the filter?
Go by the flow, not the calendar: when it has noticeably weakened, it is time to rinse the mechanical media. That is usually every few weeks. Biological media are touched less often and only rinsed in tank water.
Do I need an RCD?
Yes, it is one of the main protective measures: an RCD cuts the power if current leaks. Leave the installation to an electrician, and test it yourself from time to time with its test button, as the manual describes.
What if there is no socket nearby?
Do not run extension leads across the floor of the room or leave them under the tank. It is safer to ask an electrician to fit a socket above the water level and connect it through an RCD.
Read next
- Guides
Step-by-step guides: servicing a canister filter, setting the photoperiod, starting CO2 injection, preparing for a water change. Plus the article catalogue.
- Tools
Liquid drop tests and strips, a thermometer, a timer and a scheduled socket, a gravel vacuum with a hose and a parameter log: what helps and how to use it.
- Comparisons
Canister or internal filter, drop tests or strips, pressurised CO2 or a tank without gas injection: the pros, the hassle and who each option suits.
- Security
Water near sockets, a heater out of water, water siphoning back into an air pump, CO2 pressure, overheating cables and leaks into the flat below.
- Glossary
The nitrogen cycle, biological media, pH, KH, GH, drop checker, regulator, check valve, airlift and drip loop, explained briefly and plainly.
Sources
- Equipment manufacturers' instructions (in general terms)
- General electrical safety rules (in general terms)
- Editorial materials of the guide
Everything described here is stated in general terms and reflects the editors' understanding at the time of writing. The design of your particular filter, light or regulator may differ from our description. If the manual for your equipment says otherwise, follow it: it was written specifically for that device.