Comparisons
Comparisons
Every technical choice in an aquarium has its upsides and its hassles. One filter is quieter, another is easier to rinse; some tests are more accurate, others faster; CO2 injection speeds up plant growth but needs constant attention. The tables below do not name winners. They help you work out what matters most for your tank and your daily routine.
The best equipment is the kind you will actually maintain on time, not the kind that looks the most impressive.
How to read the tables: they describe general principles, not specific devices. Flow rate, noise and ease of maintenance vary noticeably between models, so check the manual for your own equipment.
Canister filter vs internal filter
| Criterion | Canister filter | Internal filter |
|---|---|---|
| Where it sits | Outside, usually in the cabinet, connected to the tank by hoses | Inside the tank, held to the glass by suction cups or a bracket |
| Media capacity | Large: separate baskets for mechanical and biological filtration | Small: usually one or two sponges, little room for biological media |
| Space in the tank | Only the intake and the outflow remain inside | The body takes up some volume and is visible unless hidden |
| Maintenance | Less often but longer: close the taps and open the housing | More often but simpler: lift out the body and rinse the sponge |
| Weak points | Leaks at hose connections if joints are not inspected | Vibration against the glass and running dry if the water level drops |
| Who it suits | Medium and large tanks with plants and a heavy stocking level | Small tanks, quarantine tanks and as a secondary filter |
Drop tests vs strips
| Criterion | Liquid drop tests | Test strips |
|---|---|---|
| How they work | Reagent is added to a measured sample and the colour is compared with a chart | A strip is dipped in water and its pads are compared with a colour chart |
| Accuracy | Higher, especially for KH, nitrite and nitrate | Lower: they show the overall picture and obvious deviations |
| Time | A few minutes per parameter | About a minute for the whole set of pads |
| Sources of error | Wrong number of drops or wrong sample volume | Moisture in the tube and wet fingers spoil the remaining strips |
| Storage | Keep bottles closed, away from heat and sunlight | Close the tube as soon as you take out a strip |
| When to use | Starting a tank, setting up CO2, troubleshooting | Quick routine checks between accurate tests |
Pressurised CO2 vs no CO2 injection
| Criterion | Pressurised CO2 | No CO2 injection |
|---|---|---|
| Plant growth | Faster and denser, especially for plants that need a lot of light | Calmer; undemanding plants do well |
| Lighting | Usually paired with a bright fixture and a strict timer | Moderate light with a steady photoperiod is enough |
| Monitoring | Drop checker, pH and KH tests, watching the inhabitants | Ordinary water tests and observation |
| Equipment | Cylinder, regulator, solenoid valve, bubble counter, check valve, reactor or diffuser | No extra parts needed |
| Risks | Too much gas in the water if the timer or valve fails, leaks at joints | Almost none: fewer parts mean fewer points of failure |
| Who it suits | Those ready to check the system regularly and keep a log | Those who want a calm tank with minimal maintenance |
How to choose without second-guessing
Many people combine options: a canister filter as the main one plus a small internal filter or airlift for extra flow, drop tests for accurate checks and strips for a quick look in between. That makes sense as long as you understand what job each device does and do not duplicate the same thing for no reason.
Weigh up not only what the equipment can do but also your own time. A canister filter and a pressurised system need careful maintenance on a schedule; test strips need careful storage. Choose what you will be comfortable keeping up for years, and note every change in your log.
Read next
- Guides
Step-by-step guides: servicing a canister filter, setting the photoperiod, starting CO2 injection, preparing for a water change. Plus the article catalogue.
- Tools
Liquid drop tests and strips, a thermometer, a timer and a scheduled socket, a gravel vacuum with a hose and a parameter log: what helps and how to use it.
- CO2 reactor (Russian only)
A Russian-language memo on pressurised CO2 systems: the parts, checks before start-up and why you should never build a pressure vessel yourself.
- Glossary
The nitrogen cycle, biological media, pH, KH, GH, drop checker, regulator, check valve, airlift and drip loop, explained briefly and plainly.
- Questions
Answers about the guide, about choosing and setting up equipment, about safety and about routine maintenance of aquarium gear.
Sources
- Equipment manufacturers' instructions (in general terms)
- General electrical safety rules (in general terms)
- Editorial materials of the guide
Everything described here is stated in general terms and reflects the editors' understanding at the time of writing. The design of your particular filter, light or regulator may differ from our description. If the manual for your equipment says otherwise, follow it: it was written specifically for that device.